Unpacking And Inspection; Safety Guide - US Water Systems Synergy 9000 Installation Manual

Table of Contents

Advertisement

Unpacking and Inspection

Be sure to check the entire unit for any shipping damage or lost parts. Also note damage
to the shipping cartons. Contact US Water Systems at 1-800-608-8792 to report any
shipping damage within 24 hours of delivery. Claims made after 24 hours may not be
honored. Small parts, needed to install the unit, will be in a parts bag. To avoid loss of the
small parts, keep them in the parts bag until you are ready to use them.

Safety Guide

For your safety, the information in this manual must be followed to minimize the risk of
electric shock, property damage or personal injury.
• Check and comply with provincial / state
and local codes. These codes must be
followed.
• Use care when handling the system. Do
not turn upside down, drop, drag or set
on sharp protrusions.
• The water softening system works on
120 volt-60 Hz electrical power only. Be
sure to use only the included transformer.
• Transformer must be plugged into an in-
door 120 volt, grounded outlet only.
Need help? 1.800.390.5936
• Keep the salt lid in place on the brine
tank unless servicing the unit or refilling
with salt.
• WARNING: This system is not intended
for treating water that is micro biological-
ly unsafe or of unknown quality without
adequate disinfection before or after the
system. Contact US Water Systems for
disinfection treatment equipment.
3
www.uswatersystems.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Synergy 9000 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents