Table of Contents
Advertisement
4.
Use the funnel provided to pour the softening resin into the resin tank. Pour it evenly
around the hole to ensure it is well distributed in the tank and pour slow enough to
keep from plugging the hole. A helper may be needed to hold the funnel during the
filling process. Equally divide the resin between both tanks. Pour all the resin sent
with the system equally in each tank. Larger systems may have gravel shipped with
the resin. If so, equally divide the gravel and pour it into each tank FIRST.
NOTE: It is recommended that a dust mask and safety goggles be worn to prevent
possible injury.
5.
When the media is installed, move the tanks side to side to settle the media. Remove
the funnel and tape from the distributor tubes.
Need help? 1.800.390.5936
15
www.uswatersystems.com
Advertisement
Table of Contents
Need help?
Do you have a question about the Synergy 9000 and is the answer not in the manual?