Table of Contents
Advertisement
2.
Use this display to adjust the Day Override. This option setting is identified by "DO"
in the upper left hand corner of the screen.
3.
Press the Extra Cycle button. Use this display to adjust the Regeneration Time. This
option setting is identified by "RT" in the upper left hand corner of the screen.
4.
Press the Extra Cycle button. Use this display to adjust the Feed Water Hardness.
This option setting is identified by "H" in the upper left hand corner of the screen.
Range 1 - 199 hardness
5.
Press the Extra Cycle button. Use this display to adjust the Fixed Reserve Capacity.
This option setting is identified by "RC" or "SF" in the upper left hand corner of the
screen.
6.
Press the Extra Cycle button. Use this display to set the Current Day of the week.
This option is identified by "CD" in the upper left hand corner of the screen.
7.
Press the Extra Cycle button to end User Programming Mode.
Need help? 1.800.390.5936
39
www.uswatersystems.com
Advertisement
Table of Contents
Need help?
Do you have a question about the Synergy 9000 and is the answer not in the manual?