US Water Systems Synergy 9000 Installation Manual page 29

Table of Contents

Advertisement

7.
The extra cycle button serves as an enter / return button when programming. The up
and down arrows allow value changes in each parameter programming mode. Once
the value is reached, the extra cycle button can be pushed to save the value and
move to the next parameter.
8.
The extra cycle button also initiates immediate or delayed regenerations. Pushing
and releasing it immediately triggers a delayed regeneration (will regenerate at the
time specified under RT in the programming mode). The service icon will blink when
a delayed regeneration is initiated. Pushing and holding the extra cycle button for 5
seconds will initiate an immediate regeneration. The service icon will blink and the
valve will move to the first regeneration position and begin the process.
9.
If the error icon is illuminated, there is a problem with the unit and a service techni-
cian should be contacted.
10. The x1000 icon will illuminate when values are multiplied by 1000 (capacity setting).
11. The system will hold the values for up to 48 hours after a power outage. Outages
exceeding 48 hours should be the programming values revisited. It is a good idea
to write down the programming parameters / values so they are available if a reprog-
ramming is required.
Setting the Time of Day
1.
Press and hold either the Up or Down buttons until the programming icon replaces
the service icon and the parameter display reads DO.
2.
Adjust the displayed time with the Up and Down buttons.
3.
When the desired time is set, press the Extra Cycle button to resume normal opera-
tion. The unit will also return to normal operation after 5 seconds if no buttons are
pressed.
Queuing a Regeneration
Press the Extra Cycle button and release. The service icon will flash to indicate that
regeneration is queued.
To cancel a queued regeneration, press the Extra Cycle button and release.
Regenerating Immediately
Press and hold the Extra Cycle button for five seconds.
Need help? 1.800.390.5936
29
www.uswatersystems.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Synergy 9000 and is the answer not in the manual?

Table of Contents