Xerox Phaser 7760 Service Manual page 157

008-628 Regicon Sample Lateral (A1 Patch-front)
At A1 (OUT) patch detection, the scan position of CYAN color that is the standard for the rest is
incorrect. (Against the MOB SENSOR, the center position of the CYAN pattern is shifted by
±500μm or more.?
NOTE: Status Code not displayed on UI. Machine operation continues.
Procedure
Check the IBT Belt and Drum for a scratch or contamination. The check is OK.
Y N
Replace as required.
Perform RegiCon Adjustment procedure
Revised
Phaser 7760 Color Laser Printer
ADJ 9.10.
008-629 Regicon Skew (Patch Y)
During A1 Patch detection, skew deviation for Y exceeded tolerance.
NOTE: Machine operation continues. Status Code not displayed on UI. Status Code logged in
History.
Initial Actions
Clean the MOB Sensor (REP 9.14).
Procedure
Check the IBT Belt and Drum for a scratch or contamination. The check is OK.
Y N
Replace as required.
Perform the RegiCon Skew ADJ 9.9
January 2010
2-121
procedure.
Status Indicator RAP's
008-628, 008-629