Rep 12.66 Finisher H-Transport Drive Belt - Xerox Phaser 7760 Service Manual

b. Hold the bottom of the Buffer Chute Assembly and move the Boss out of the hole
from the rear Frame (Figure 3).
Figure 3 Removing Bottom Buffer Chute Assembly
Replacement
NOTE: Ensure to align the Boss in the hole in the rear Frame
Revised
Phaser 7760 Color Laser Printer

REP 12.66 Finisher H-Transport Drive Belt

Parts List on
Removal
1.
2.
3.
4.
5.
(Figure 3).
January 2010
4-85
PL 21.27
Move the Finisher away and unplug the connector to the Horizontal Transport.
Remove the Horizontal Transport Assembly
Remove the Horizontal Transport Rear Cover (remove 3 screws and loosen 1 screw).
Remove the Upper Decurler Cover (PL 21.24).
Removing the Horizontal Transport Center Tray
a. Remove the 2 screws and the Horizontal Transport Center Tray
Figure 1 Removing the Horizontal Transport Center Tray
b. Remove the 3 screws and 1 Washer securing the Decurler Cover
Figure 2 Removing 3 Screws and 1 Washer
(REP 12.51).
(Figure 1).
(Figure 1).
(Figure 2).
Repairs and Adjustments
REP 12.65, REP 12.66