ADJ 9.5 Tone Up/Down
Purpose
This function compares a corrected target value to the ATC Sensor value on each individual
Developer.
Procedure
NOTE: Data cannot be adjusted within this function. This is an information only.
1.
Enter the
Service Diagnostics
Menu: Printer Menu > Troubleshooting > Service Tools
> Printer Status Page > hold the Up and Down buttons simultaneously > Run Service
Diagnostics > OK.
2.
Select Adjustments/Calibrations and press OK.
3.
Select Tone Up/Down and press OK.
4.
The printer starts processing data with Measuring... message appears.
5.
Review the results to ensure there are no failures (refer to Section 8,
detailed information).
6.
Press any key to see more data.
Revised
Phaser 7760 Color Laser Printer
ADJ 9.6 Laser Power Check
Purpose
This function tests the laser output.
Procedure
NOTE: Data cannot be adjusted within this function. This is an information only.
1.
Enter the
Service Diagnostics
> Printer Status Page > hold the Up and Down buttons simultaneously > Run Service
Diagnostics > OK.
2.
Select Adjustments/Calibrations and press OK.
3.
Select Laser Power Check and press OK.
4.
The printer starts processing the data and displays the results:
•
Y=OK M=OK C=OK K=OK
ATC Sensors
for
•
YMCK=OK
•
YMCK(CycUp)=OK
5.
Press any key to exit.
January 2010
4-99
Menu: Printer Menu > Troubleshooting > Service Tools
Repairs and Adjustments
ADJ 9.5, ADJ 9.6