Table of Contents
Advertisement
Procedure
1. Install the rack rail option.
For more information, see the installation instructions that ship with the selected rail system.
2. Install the server into the rack:
a. Align the inner rail of the server with the outer rail.
b. Slide the server into the rack until the quick-release latches engage with the front columns of the rack.
c. Open the latches and tighten the shipping screws, if necessary.
3. Install the cable management arm into the rack.
For more information, see the installation instructions that ship with the option.
4. Connect peripheral devices to the server.
For information on identifying connectors, see Rear panel components on page 12.
52
Setup
Advertisement
Table of Contents
