Table of Contents
Advertisement
2. Install the Kensington security lock.
Powering up the server
Procedure
1. Remove the bezel.
2. Use one of the following methods to power up the server:
•
Press the Power On/Standby button.
•
Use the virtual power button through iLO.
3. Install the bezel.
Powering down the server
IMPORTANT: When the server is in standby mode, auxiliary power is still being provided to the system.
Prerequisites
Before powering down the server for any upgrade or maintenance procedures, perform a backup of critical server data
and programs.
Procedure
1. Remove the bezel.
2. To power down the server, use one of the following methods.
•
Press and release the Power On/Standby button.
Operations
27
Advertisement
Table of Contents
