Chapter 4
Install the LS-Steer and LS-PV Hoses
Disconnect the original load sense hose from the steering orbitrol.
1.
Machine's Steering Orbitrol
FIGURE 4.
Connect the original load sense hose to the extension hose (P/N 214-1000-285) using the supplied 45 °
2.
elbow (P/N 333-0012-151).
Route the hose to the 'LS-PV' port on the SmarTrax hydraulic valve.
3.
Connect the supplied 'LS-Steer' hose (P/N 333-0012-284) to the 'LS-Steer' port on the SmarTrax hydraulic
4.
valve.
Route and connect the other end of the hose to the steering orbitrol.
5.
SmarTrax Hydraulic Valve
FIGURE 5.
14
CaseIH MX 210, 230, 255, and 285 SmarTrax Installation Manual