Table of Contents
Advertisement
Chapter 3
Note:
Depending on the year and model of the machine, you may also need to use the supplied
mounting plate (P/N 116-0159-578).
Mount the SmarTrax hydraulic valve (P/N 334-0003-066) to the mounting bracket (P/N 116-0159-527) using
3.
the supplied bolts (P/N 311-0052-104) and flat washers (P/N 313-1000-019).
SmarTrax Valve Mounting Location
FIGURE 2.
Affixing the SmarTrax Tampering Warning
Label
Raven Industries supplies a tampering warning label (P/N 041-0159-689) with all SmarTrax kits. This label
should be applied on or near the SmarTrax hydraulic valve or mounting bracket and in a location where anyone
working on the machine is able to clearly see and read the label.
Thoroughly clean and dry the surface to which the label will be affixed.
1.
Remove the protective backing from the tampering warning label (P/N 041-0159-689).
2.
Carefully apply the label to the cleaned area and rub with a dry cloth to ensure the label is firmly applied.
3.
10
CaseIH MX 210, 230, 255, and 285 SmarTrax Installation Manual
SmarTrax Mounting
Bracket (P/N 116-
0159-527)
SmarTrax Hydraulic
Valve (P/N 334-
0003-066)
Advertisement
Table of Contents
