Install Left And Right Cylinder Hoses - Raven AutoBoom Installation Manual

Chapter 3
Attach the machine's tank line to the opposite end of the installed tee fitting.
8.
Connect the straight end of the supplied hydraulic hose (P/N 214-1000-495) to the 90° end of the installed
9.
tee fitting.
Connect the 90° end of the hydraulic hose to Port T on the AutoBoom valve.
10.

Install Left and Right Cylinder Hoses

Left and Right Cylinder Hoses Installed
FIGURE 10.
Disconnect the machine's left and right tilt hoses from the machine's hydraulic valve.
1.
Install 11/16" ORFS M/M/F swivel run tee adapter fittings (P/N 333-0012-069) in the tilt hose ports of the
2.
machine's manifold.
Connect the machine's right tilt hose to the opposite end of the tee fitting.
3.
Connect the straight end of the supplied hydraulic hose (P/N 214-1000-494) to the 90° end of the tee
4.
adapter installed in the right tilt port.
Connect the 90° end of the hydraulic hose to the installed fitting in Port RC on the AutoBoom valve.
5.
Install the 11/16" ORFS M/F swivel elbow fitting (P/N 333-0012-090) on the opposite end of the tee adapter
6.
installed on the left tilt port.
Connect the machine's left tilt hose to the installed elbow fitting.
7.
Connect the straight end of the supplied hydraulic hose (P/N 214-1000-494) to the 90° end of the tee
8.
adapter.
Connect the 90° end of the hydraulic hose to the installed fitting in Port LC on the AutoBoom valve.
9.
14 Miller Condor Spray-Air Boom AutoBoom Installation Manual