Install The Tank Hose; Install The Left & Right Steer Hoses - Raven SmarTrax Installation Manual

Install the Tank Hose

Locate the hydraulic reservoir on the right side of the machine and the existing tank line.
1.
Hydraulic Reservoir
FIGURE 3.
Hydraulic Reservoir
Disconnect one of the tank lines feeding into the reservoir.
2.
Connect the supplied tee fitting (P/N 333-0012-028) onto the existing line and reconnect the existing
3.
machine hose to the installed tee fitting. Use the supplied elbow fitting (P/N 333-0012-067) if necessary to
help with hose routing.
Connect the supplied hose (P/N 214-1000-486) to the remaining connector on the installed tee fitting and
4.
route to the 'T' port on the SmarTrax valve block. A supplied elbow fitting (P/N 333-0012-042) may be
installed on the SmarTrax block for hose routing purposes.
SmarTrax Tank Line
FIGURE 4.
Install the Left & Right Steer Hoses
Locate the base end of the left steering cylinder.
1.
Disconnect the hose connected to the base of the hydraulic steering cylinder.
2.
Manual No. 016-0190-083
Existing Tank Line
SmarTrax Tank Line Connections
Hydraulic Connections
Tee Fitting Installed
for SmarTrax
13