Install The Left And Right Steer Hoses - Raven SmarTrax Installation Manual

Chapter 4

Install the Left and Right Steer Hoses

The left and right steer hoses connect to the Multifunction valve just behind the hydraulic pump above the drive
shaft.
Multifunction Valve
FIGURE 5.
Multifunction Valve
Disconnect the existing -6 JIC left and right steer hoses labeled LHC and RHC respectively.
5.
Install the supplied -6 JIC (M/M/F) run tee fittings (P/N 333-0012-043) and reconnect the original hoses to
6.
the fittings.
Left and Right Steer Connection (Hoses Go To The Steering Cylinder(s))
FIGURE 6.
Left and Right Steer Hoses
Connected to Ports 'LHC'
and 'RHC' on the
Multifunction Valve (Hoses
Run to the Steering
Cylinder(s))
14 Apache AS 20 Series SmarTrax Installation Manual