Handpiece Connection; System Power Up - Pace ST 85 Operation & Maintenance Manual

Handpiece Connection

Connect the handpiece connector plug into the Power Receptacle in the following
manner.
1. Align guide on connector with slot on
power receptacle.
2. Insert connector into power receptacle.
3. Turn the connector housing clockwise
to lock in place.

System Power Up

1. Insert the female end of the power cord into the AC Power Receptacle at
the rear panel of the power source.
2. Plug the prong end (male end) of the power cord into a 3 wire grounded
AC supply receptacle. The system is now ready for operation.
To ensure operator safety, the AC supply receptacle must be checked for proper
grounding before initial operation.
3. Read this manual and all other included manuals thoroughly before
operating the system.
CAUTION
Set-Up
17