Safety; Safety Guidelines, English Language - Pace ST 85 Operation & Maintenance Manual

Safety

Safety Guidelines - English Language
The following are safety precautions which personnel must understand and follow
when using or servicing PACE products.
1. POTENTIAL SHOCK HAZARD - Repair procedures on PACE
products should be performed by Qualified Service Personnel only.
Line voltage parts may be exposed when the equipment is disassembled.
Service personnel must avoid contact with these parts when
troubleshooting the product.
2. To prevent personnel injury, adhere to safety guidelines in accordance
with OSHA and other applicable safety standards.
3. SensaTemp handpiece heaters and installed tips are hot when the
handpiece is powered on. DO NOT touch either the heater or the tip.
Severe burns may result.
4. PACE Tip & Tool Stands and handpiece cubbies are designed
specifically for use with the associated handpiece and houses it in a
manner which protects the user from accidental burns. Always store the
handpiece in its holder. Be sure to place the handpiece in its holder after
use and allow to cool before storing.
5. Always use PACE systems in a well ventilated area. A fume extraction
system such as those available from PACE are highly recommended to
help protect personnel from solder flux fumes.
6. Exercise proper precautions when using chemicals (e.g., solder paste).
Refer to the Material Safety Data Sheet (MSDS) supplied with each
chemical and adhere to all safety precautions recommended by the
manufacturer.
6