Table of Contents
Advertisement
Auto Off
13. The LED Display now shows the stored Auto
Off time as "AOx" (x=0 thru 9). Time is shown
as tens of minutes (e.g., "AO3" equals 30
minutes). A display of "AO0" indicates that
Auto Off is disabled. Choose one of the
following:
a) Press and release the Program Key (
currently stored Auto Off time.
b) Press and release the Scroll Up (
Auto Off. Press and release the Program Key to proceed to the next step.
c) Press and release the Scroll Down (
stored Auto Off time. Press and release the Program Key to proceed to
the next step.
Temperature Display Impedance
14. The LED Display now shows the Temperature
Display Impedance mode as Enabled or
Disabled ("AC0" = Disabled and "AC1" =
Enabled). Choose one of the following:
a) Press and release the Program Key (
currently stored setting (Disabled or Enabled).
b) Press and release the Scroll Up (
(Disabled or Enabled). Press and release the Program Key to proceed
to the next step.
Exiting Set-Up Mode
15. The LED Display now reads "End". The Set-
Up Mode procedure is now complete.
Choose one of the following steps:
a) Press and release the Scroll Up (
return to normal operation.
b) Press and release the Scroll Down (
Set-Up Mode procedure. Go back to step 4.
34
) Key to enable and/or increase the
I
) Key to decrease or disable the
J
) Key to change the stored setting
I
) Key to exit Set-Up Mode and
I
) Key to return to the start of the
J
Set-Up Mode
) to keep the
) to keep the
Advertisement
Table of Contents
