Led Display, Normal Operation - Pace ST 85 Operation & Maintenance Manual

Operation
The ST 85 system is very easy to adjust and operate. The following instructions
detail system features and operation of the system. Also included is a "Quick Tour"
of system operation.
Information regarding changing of system options (e.g., Temperature Setback time,
Auto Off) is contained in the "Set-Up Mode" portion of this manual.

LED Display, Normal Operation

The LED Display provides a 3 digit display of temperature information. The LED
Display will show:
1. A display of "888" on initial power up to
ensure that all LEDs on the display are
working.
2. A display of the the software version of the installed microprocessor (e.g.,
"1-1") for 2 seconds on initial power up after the "888" is displayed.
3. Actual tip temperature of the connected handpiece during normal operation.
4 The tip temperature displayed will flash when the system is in Temperature
Setback.
5. The displayed temperature will decrease and
stabilize at 177°C (350°F) when the system is
in Temperature Setback.
6. "OFF" when the Set Tip Temperature has
been set to Off (below minimum set tip
temperature). Refer to the "Set-Up Mode"
portion of this manual.
7. "OFF" plus the LED Display will be flashing
when the unit has entered Auto Off. Refer to
the "Set-Up Mode" portion of this manual.
23