Table of Contents
Advertisement
Select Enable and then set Type to People Approach Detection.
Step 3
Step 4
Draw detection rule.
1. Click
, and then draw a detection area on the video image. Right-click the image to
stop drawing.
2. Configure parameters.
Table 5-40 Parameters of people approach detection
Parameter
Name
Sensitivity
Duration
Repeat Alarm Time
Interval Threshold
3. Click OK.
Step 5
Configure alarm schedule and linkage.
1. Click
.
2. Click Setting next to Schedule to configure the alarm period.
The system performs linkage actions only for alarms during the arming period.
On the time line, drag to set the period.
●
You can also click
●
3. Configure alarm linkage. For details, see Table 5-47 .
4. Click Apply.
Click Apply.
Step 6
Description
Customize the rule name.
Set alarm sensitivity.
Set how long two people stay in the same detection area until an alarm
is triggered.
Set repeat alarm time. If the alarm-triggering event continues, an alarm
will be triggered again when repeat alarm time passed.
When the distance between people in the area is greater than or less
than the defined threshold, an alarm will be triggered.
Figure 5-149 Schedule and alarm linkage
to set the period.
262
User's Manual
Advertisement
Table of Contents
