Step 3
You can select Local Hotspare or Global Hotspare.
Local Hotspare : Select the target disk, and the current disk will serve as the hot spare
●
disk for the selected target disk.
Global Hotspare : The current disk will serve as the hot spare disk of the entire RAID.
●
Click OK.
Step 4
Click
5.12.4 Disk Group
Background Information
By default, the installed HDD and created RAID are in Disk Group 1. You can set HDD group, and
HDD group setup for main stream, sub stream and snapshot operation.
Procedure
Step 1
Select Main Menu > STORAGE > Disk Group.
Figure 5-231 Local hotspare
Figure 5-232 Global hotspare
to delete a hot spare disk.
355
User's Manual