Table of Contents
Advertisement
Parameter
Name
Direction
Target Filter
4. Click OK.
Step 6
Configure alarm schedule and linkage.
1. Click
2. Click Setting next to Schedule to configure the alarm period.
The system performs linkage actions only for alarms during the arming period.
●
●
3. Configure alarm linkage. For details, see Table 5-47 .
4. Click Apply.
Select the Enable checkbox and then click Apply.
Step 7
5.9.6.2.2 Intrusion
Background Information
When the detection target passes the edge of the monitoring area, and enters, leaves or traverses
the monitoring area, the system performs an alarm linkage action.
Table 5-32 Tripwire parameters
Description
Customize the rule name.
Set the tripwire direction, including A→B, B→A and A↔B.
Click
and then select effective target. With Human and Motor
Vehicle selected by default, the system automatically identifies the
person and motor vehicle appeared within the monitoring range.
Figure 5-125 Schedule and alarm linkage
.
On the time line, drag to set the period.
You can also click
to set the period.
239
User's Manual
Advertisement
Table of Contents
