Table of Contents
Advertisement
For cameras accessed through private protocol, you can click LIVE and then enter the
●
username and password to play live video.
To filter the remote devices, you can enter all or part of device name in the Filter box.
●
To filter out the uninitialized devices, click the Not Initialized tab, and then you can
●
initialize the devices. For details, see "5.7.1 Initializing Remote Devices".
To view all remote devices added through plug and play, you can click the Not Auto
●
Connected tab. You can remove devices added through plug and play, and they can
be automatically added again after plug and play is enabled.
(Optional) Enable Plug and Play.
Step 3
When Plug and Play is enabled, the NVR automatically adds remote devices on the same
subnet.
For uninitialized remote devices, the NVR automatically initializes them before adding
them.
(Optional) Enable H.265 Auto Switch.
Step 4
When H.265 Auto Switch is enabled, the video compression standard of added remote
devices is switched to H.265 automatically.
Figure 5-61 Search device
172
User's Manual
Advertisement
Table of Contents
