Table of Contents
Advertisement
2. Configure parameters.
Parameter
Description
Select a type according to the number of fisheye and PTZ cameras:
●
Type
●
●
Scene Name
Customize the scene name.
Select a fisheye camera.
i. Click Select in Main Camera line.
Main Camera
ii. Select a fisheye camera.
iii. Click Apply.
Select speed domes as needed.
i. Click Select in Sub Camera line.
Sub Camera
ii. Select speed domes.
iii. Click Apply.
Click Apply.
Step 3
The monitoring area is successfully added.
Step 4
Configure calibration points to set the binding relationship of fisheye camera and speed
dome.
Set a distant place as the first calibration point to improve accuracy.
1. Click
or double-click the target scene.
2. Click the target place on the video of fisheye camera, or move
The video at upper-left corner is the fisheye camera screen, and the video at upper-
right corner is the speed dome screen.
3. Adjust position through the icons below the speed dome screen to make the center of
speed dome identical to the
The
on the speed dome screen is the center of speed dome.
Icon
,
,
,
Table 5-48 Main-sub tracking parameters
1 Fisheye + 1 PTZ.
1 Fisheye + 2 PTZ.
1 Fisheye + 3 PTZ.
of fisheye camera.
Table 5-49 Icon description
Description
Zoom in and zoom out.
Adjust resolution.
Adjust height.
294
User's Manual
to the target place.
Advertisement
Table of Contents
