Table of Contents
Advertisement
You can see the corresponding prompt if you successfully enabled cluster service.
6.4.5.2 Arbitrage IP
Background Information
When there are only 2 devices in the cluster, a third-party device is required to determine whether
the main device is faulty, so arbitration IP must be set for the cluster to perform a normal
replacement operation. The arbitration IP can be the IP address of another device, computer or
gateway.
Procedure
Step 1
Select SETTING > Cluster Service > Arbitrage IP.
Step 2
Configure the preferred and alternate IP.
Click OK.
Step 3
6.4.6 Cluster Log
Background Information
You can search for and view cluster logs.
Procedure
Select SETTING > Cluster Service > Cluster Log.
Step 1
Figure 6-3 Start cluster
Figure 6-4 Arbitrage IP
438
User's Manual
Advertisement
Table of Contents
