Table of Contents
Advertisement
5.9 AI
AI detection is to process and analyze the image and extract the key information, and then
compare the key information with the preset detection rule. An alarm is triggered when the
detected behavior matches the detection rule.
The following figures are for reference only and might differ from the actual situation.
5.9.1 Overview
AI detection falls into AI by camera and AI by recorder.
AI by camera: Some cameras themselves support AI detection. The cameras perform AI
●
detection and send the detection results to the NVR for display. When using AI by camera, make
sure to connect the Device to the cameras that support the corresponding AI detection
functions.
AI by recorder: The cameras send videos to NVR for detection, analysis and result display.
●
Some models support AI by camera only.
●
The AI functions might vary with models.
●
Different AI functions might conflict with each other. You cannot enable two conflicting AI
●
functions for the same channel.
Figure 5-98 Recording information
215
User's Manual
Advertisement
Table of Contents
