Table of Contents
Advertisement
Step 4
Configure the parameters.
The parameters might vary depending on the manufacturer that you select.
Parameter
Channel
Manufacturer
Registration ID
IP Address
RTSP Port
HTTP Port
TCP Port
Username
Password
Total Channels
Remote CH No.
Decode Strategy
Figure 5-62 Manual add
Table 5-17 Remote channel parameters
Description
Select the channel that you want use on the Device to connect the
remote device.
Select the manufacturer of the remote device.
Enter the registration ID of the remote device.
Enter the IP address of the remote device.
Enter the RTSP port number. The default value is 554.
Enter the HTTP port number. The default value is 80.
The default value is 37777. You can enter the value as needed.
Enter the username of the remote device.
Enter the password of the user for the remote device.
Click Connect to get the total number of channels of the remote
device.
Enter the remote channel number of the remote device.
Select Default , Realtime, or Fluent.
174
User's Manual
Advertisement
Table of Contents
