Table of Contents
Advertisement
Parameter
Private Protocol
Authentication Mode
LLDP
Click Apply.
Step 3
5.14.2.2 802.1x
The Device needs to pass 802.1x certification to enter the LAN.
Procedure
Step 1
Select Main Menu > SECURITY > System Service > 802.1x.
Step 2
Select the Ethernet card you want to certify.
Select Enable and configure parameters.
Step 3
Description
Security Mode (Recommended): Uses Digest access
●
authentication when connecting to NVR.
Compatible Mode: Select this mode when the client does not
●
support Digest access authentication.
Enable the LLDP service.
The Link Layer Discovery Protocol (LLDP) allows two different devices
to collect hardware and protocol information about neighboring
devices, which is useful in troubleshooting the network.
Figure 5-265 802.1x
382
User's Manual
Advertisement
Table of Contents
