Table of Contents
Advertisement
Procedure
Select Main Menu > ALARM > Thermal Alarm.
Step 1
Step 2
Select a channel and set alarm type to heat alarm, and then enable the function.
Step 3
Select fire mode. The system supports preset mode and zone excluded mode.
Preset mode: Select a preset and then enable the function. The system generates an
●
alarm once it detects there is a fire.
Zone excluded mode: The system filters the specified high temperature zone. The
●
system generates an alarm once the rest zone has fire.
Step 4
Configure alarm linkage. For details, see Table 5-47 .
Click Apply.
Step 5
5.10.8 Exception
Background Information
When an error in HDD, network, and device occurs, the system performs alarm linkage actions.
Procedure
Select Main Menu > ALARM > Exception.
Step 1
Figure 5-199 Thermal alarm
317
User's Manual
Advertisement
Table of Contents
