Table of Contents
Advertisement
Step 3
Draw the detection rule.
a. Click
to draw a rectangle on the surveillance video image. Right-click the image to
stop drawing.
b. Click
to draw the minimum size or maximum size to filter the target.
The system triggers an alarm only when the size of detected target is between the
maximum size and the minimum size.
Click
to delete the drawn size.
c. Configure the rule name and duration.
d. Click OK.
Step 4
Configure alarm schedule and linkage.
a. Click
.
b. Click Setting next to Schedule to configure the alarm period.
The system performs linkage actions only for alarms during the arming period.
c. Configure alarm linkage. For details, see Table 5-47 .
d. Click Apply.
Click Apply.
Step 5
Figure 5-183 Schedule and alarm linkage
300
User's Manual
Advertisement
Table of Contents
