Table of Contents
Advertisement
Step 2
Enable the system services.
There might be safety risk when Mobile Push Notifications, CGI, ONVIF, SSH and NTP
Server is enabled. Disable these functions when they are not needed.
Parameter
Mobile Push Notifications
CGI
ONVIF
NTP Server
SSH
Enable Device Discovery
Figure 5-264 Basic services
Table 5-75 Basic service parameters
Description
After enabling this function, the alarm triggered by the NVR can be
pushed to a mobile phone. This function is enabled by default.
If this function is enabled, the remote devices can be added through
the CGI protocol. This function is enabled by default.
If this function is enabled, the remote devices can be added through
the ONVIF protocol. This function is enabled by default.
After enabling this function, a NTP server can be used for time
synchronization. This function is enabled by default.
After enabling this function, you can use SSH service. This function is
disabled by default.
After enabling this function, the NVR can be found by other devices
through searching.
381
User's Manual
Advertisement
Table of Contents
