Table of Contents
Advertisement
Parameter
Description
Enable the system to report the alarm to the alarm center.
Report Alarm
Make sure that alarm center has been configured in Main Menu >
NETWORK > Alarm Center.
Enable the system to send an email to notify you when an alarm occurs.
Send Email
Make sure that the email settings have been configured in Main Menu >
NETWORK > Email.
Record Channel
When an alarm occurs, the system activates recording of the selected
channel. After the alarm ends, the recording continues for a period of
time depending on the defined value for Post-Record.
Post-Record
Make sure that intelligent recording schedule and auto recording have
been configured. For details, see "5.8.1 Recording Schedule".
When an alarm occurs, the NVR associates the channel to perform the
corresponding PTZ action. For example, rotate the PTZ to the preset
point.
PTZ Linkage
Make sure that PTZ actions have been configured. For details, see "5.6.7
PTZ".
When an alarm occurs, the local page of the NVR displays the image of the
selected channels in turn.
Tour
Make sure that the time interval and mode for tour have been configured
in Main Menu > DISPLAY > Tour Setting.
When an alarm occurs, the system takes a snapshot of the channel and
stores the snapshot on the Device.
Picture Storage
Make sure that snapshot schedule and snapshot mode have been
configured. For details, see "5.8.1 Recording Schedule".
Buzzer
The system activates the buzzer when an alarm occurs.
Log
When an alarm occurs, the system records the event in the logs.
When an alarm occurs, the system plays the selected audio file.
Alarm Tone
Make sure that the audio files have been uploaded to the system. For
details, see "5.18.1 File Management".
Step 8
Click Apply.
290
User's Manual
Advertisement
Table of Contents
