Table of Contents
Advertisement
5.6.7.4 Using PTZ Functions
After you have configured the PTZ settings, you can use the PTZ functions from the expanded PTZ
control panel.
5.6.7.4.1 Presets
Procedure
Step 1
On the expanded PTZ control panel, in the No. box, enter the value of the preset.
Step 2
Click
Step 3
Click
5.6.7.4.2 Tours
Procedure
Step 1
On the expanded PTZ control panel, in the No. box, enter the value of the tour.
Step 2
Click
Step 3
Click
5.6.7.4.3 Patterns
Procedure
On the expanded PTZ control panel, in the No. box, enter the value of the pattern.
Step 1
Step 2
Click
The PTZ camera moves according to the configured pattern repeatedly.
Step 3
Click
5.6.7.4.4 AutoScan
Procedure
On the expanded PTZ control panel, in the No. box, enter the value of the border.
Step 1
Step 2
Click
The PTZ camera performs scanning according to the configured borders.
Step 3
Click
Figure 5-43 Expanded PTZ control panel
to call the preset.
again to stop calling the preset.
to call the tour.
again to stop calling the tour.
to call the pattern.
again to stop calling the pattern.
.
again to stop auto scanning.
155
User's Manual
Advertisement
Table of Contents
