5.9.7.2.3 Violence Detection
When the target in the detection region has large body movements such as smashing and fighting,
an alarm will be triggered.
Procedure
Select Main Menu > AI > Parameters > Stereo Analysis.
Step 1
Select a channel and then click Add.
Step 2
Select Enable and then set Type to Violence Detection.
Step 3
Step 4
Draw detection rule.
1. Click
stop drawing.
2. Configure parameters.
Parameter
Name
Sensitivity
3. Click OK.
Step 5
Configure alarm schedule and linkage.
1. Click
2. Click Setting next to Schedule to configure the alarm period.
The system performs linkage actions only for alarms during the arming period.
●
●
3. Configure alarm linkage. For details, see Table 5-47 .
4. Click Apply.
Click Apply.
Step 6
, and then draw a detection area on the video image. Right-click the image to
Table 5-42 Parameters of violence detection
Description
Customize the rule name.
Set alarm sensitivity.
Figure 5-151 Schedule and alarm linkage
.
On the time line, drag to set the period.
You can also click
to set the period.
264
User's Manual