Table of Contents
Advertisement
Step 3
Click Setting next to Schedule to configure the alarm schedule.
Step 4
Configure the anti-dither period.
If multiple alarms occur during the anti-dither period, the system only record the event
once.
Step 5
Configure alarm linkage. For details, see Table 5-47 .
Enable Disarming so that you can connect a switch to the alarm input port for disarming
Step 6
control.
Click Apply.
Step 7
5.10.4 Alarm Output
Background Information
You can set proper alarm output mode to auto, manual or off. After you connect the alarm device
to the alarm output port of NVR, and set the mode to auto, the system performs alarm linkage
actions when an alarm occurs.
Auto: Once an alarm event occurs, the system generates an alarm.
●
Figure 5-193 Local alarm
309
User's Manual
Advertisement
Table of Contents
