Table of Contents
Advertisement
Procedure
Select Main Menu > DISPLAY > Display.
Step 1
Step 2
Configure the parameters.
Parameter
Main Screen/Sub
Screen
Enable Decoding
Time Title/Channel
Title
Transparency
Time Title/Channel
Title
Image Enhancement Select the checkbox to optimize the preview image edges.
SMD Preview
Figure 5-283 Display
Table 5-83 Display parameters
Description
Configure the output port format of both screens.
When sub screen is disabled, the format of main screen is HDMI/VGA
●
simultaneous output.
When sub screen is enabled, the format of main screen and sub screen
●
are non-simultaneous outputs.
When output port of sub screen is set to HDMI , the output port of
main screen is set to VGA by the device.
When output port of sub screen is set to VGA , the output port of
main screen is set to HDMI by the device.
After it is enabled, the device can normally decode.
Select the checkbox and the date and time of the system will be displayed
in the preview screen.
Set the transparency of the local menu of the NVR device. The higher the
transparency, the more transparent the local menu.
Select the checkbox and the date and time of the system will be displayed
in the preview screen.
Select the checkbox to display the SMD previews in the live view page.
400
User's Manual
Advertisement
Table of Contents
