Table of Contents
Advertisement
R0P7727TH003TRKE General Information Manual
6.4.2 Touch Panel Status Register (TPLSR)
Address: 0x0021 Initial value: 0x00
D7
D6
0
0
R
R
(1) PEN_ONIF
PEN_ONIF bit
0
1
(2) PEN_OFFIF
PEN_OFFIF bit
0
1
D5
D4
0
0
R
R
The touch panel has not been pen-touched. (pen touch OFF.)
(Initial value)
The pen-touch state on the touch panel has been changed from
OFF to ON. The touched positions on the touch panel are output to
the X position A/D register, Y position A/D register, X position dot
register and Y position dot register. At this time, a pen touch ON
interrupt is generated if the PEN_ONI bit is set to "1.''
[Clear condition]
"0'' is written with the PEN_ONIF bit set to ''1.''
The touch panel has not been pen-touched. (pen touch OFF.)
(Initial value)
The pen-touch state on the touch panel has been changed from ON
to OFF. At this time, a pen touch OFF interrupt is generated if the
PEN_OFFI bit is set to "1.''
[Clear condition]
"0'' is written with the PEN_OFFIF bit set to ''1.''
D3
D2
0
PEN_OFFIF
PEN_ONIF
R
R/W
Setting
Setting
60
Power Supply Controller
D1
D0
0
R/W
R
Advertisement
Table of Contents
