Dx Dot Register (Dxdr); Dy Dot Register (Dydr) - Renesas SH7727 General Information Manual

R0P7727TH003TRKE General Information Manual

6.4.20 DX Dot Register (DXDR)

Address: 0x0044 Initial value: 0x0000
D15 D14
DX1_D15 DX1_D14
R/W R/W
D7 D6
DX1_D7 DX1_D6
R/W R/W
The DX dot register holds a value obtained by multiplying the number of dots per data (X position A/D
conversion result at calibration) by 1,000. The power supply controller outputs a dot position of the X
position to be stored in the X position dot register (XPDR) from the values set in the DX dot register (DXDR),
XA position dot register (XAPDR) and XA position A/D register (XAPAR). When the DX dot register (DXDR)
has been set to "0," the dot position is not calculated.

6.4.21 DY Dot Register (DYDR)

Address: 0x0046 Initial value: 0x0000
D15 D14
DY1_D15 DY1_D14
R/W R/W
D7 D6
DY1_D7 DY1_D6
R/W R/W
The DY dot register (DY1DR) holds a value obtained by multiplying the number of dots per data (Y position
A/D conversion result at calibration) by 1,000. The power supply controller outputs a dot position of the Y
position to be stored in the Y position dot register (YPDR) from the values set in the DY dot register (DYDR),
YA position dot register (YAPDR) and YA position A/D register (YAPAR). When the DY dot register (DY1DR)
has been set to "0," the dot position is not calculated.
D13 D12
DX1_D13 DX1_D12
R/W R/W
D5 D4
DX1_D5 DX1_D4 DX1_D3
R/W R/W
D13 D12
DY1_D13 DY1_D12
R/W R/W
D5 D4
DY1_D5 DY1_D4 DY1_D3
R/W R/W
D11 D10
DX1_D11 DX1_D10
R/W R/W
D3 D2 D1
DX1_D2 DX1_D1
R/W R/W R/W
D11 D10
DY1_D11 DY1_D10
R/W R/W
D3 D2 D1
DY1_D2 DY1_D1
R/W R/W R/W
67
Power Supply Controller
D9 D8
DX1_D9 DX1_D8
R/W R/W
D0
DX1_D0
R/W
D9 D8
DY1_D9 DY1_D8
R/W R/W
D0
DY1_D0
R/W