Verifying Operating Status; Configuring The Environment; Powering Up The Ap; Checking Environment Before Power-On - Ruijie RG-AP810-I Hardware Installation And Reference Manual

Hardware Installation and Reference Guid
4

Verifying Operating Status

4.1

Configuring the Environment

Use a power adapter or PoE to power the AP.
Setting up the Environment
Verify that the AP is properly connected to the power source.

Connect the AP to an AC through a twisted pair cable.

When the AP is connected to a PC, verify that the PC and PoE switch are properly

grounded.
4.2

Powering up the AP

4.2.1

Checking Environment before Power-on

Verify that the power supply is properly connected.

Verify that the input voltage matches the specification of the AP.

4.2.2

Checking Environment after Power-on

After power-on, you are advised to check the following to ensure normal operation of the
AP.
Check if any message is printed on the Web-based configuration interface of the

device.
Check if the LED works normally.

25
Verifying Operating Status