Leds And Button - Ruijie RG-AP810-I Hardware Installation And Reference Manual

Hardware Installation and Reference Guid
Humidity
Regulatory
compliance
1.4

LEDs and Button

Table 1-9 Fit AP
State
Off
Blinking
green
Solid green
Blinking red
Solid orange
Blinking
orange
Solid blue
Blinking blue
Reset button
Table 1-10 Fat AP
State
Off
At a height between 3000 m (9842.52 ft.) to 5000 m (16404.20 ft.)
above the sea level, every time the altitude increases by 166 m (546
ft.), the maximum temperature decreases by 1°C (1.8°F).
Operating: 5% to 95% (RH), non-condensing
Storage: 5% to 95% (RH), non-condensing
EN 55032, EN 55035, EN 61000-3-3, EN IEC 61000-3-2, EN 301 489-1,
EN 301 489-3, EN 301 489-17, EN 300 328, EN 301 893, EN 300 440,
FCC Part 15, EN IEC 62311, IEC 62368-1, and EN 62368-1
Frequency Meaning
The AP is NOT receiving power or the AP is in Do Not
N/A
Disturb mode, which can be disabled by software.
3Hz uBoot program initialization is in progress.
N/A Main program initialization is in progress.
3Hz Initialization is complete, but no Ethernet activity.
2Hz Locate the AP.
Initialization is complete, and the AP is establishing a
N/A
CAPWAP connection with an AC.
3Hz Firmware upgrade in progress. Do not power off the AP.
Normal operation, but no wireless clients are associated
N/A
with the AP.
Normal operation, and at least one wireless client is
3Hz
associated with the AP.
Pressed for
Reboot the device.
less than 2s
Pressed for
more than Restore default settings.
3s
Frequency Meaning
The AP is NOT receiving power. Or the AP is in Do Not
N/A
Disturb mode, which can be disabled by software.
7
Product Overview