Verifying Operating Status; Setting Up The Environment; Powering Up The Ap; Checking Environment Before Power-On - Ruijie HA3515-DG Hardware Installation And Reference Manual

Hardware Installation and Reference Guide
4

Verifying Operating Status

4.1

Setting up the Environment

Power the AP up by using a power adapter.
Verify that the AP is properly connected to the power source and compliant with safety requirement.

Connect the gigabit G.hn/LINE port of the AP to the LINE port of the switch through a telephone line.

4.2

Powering up the AP

Checking Environment before Power-on

4.2.1
Verify that the power supply is properly connected.

Verify that the input voltage matches the specification of the AP.


Checking Environment after Power-on

4.2.2
After power-on, you are advised to check the following to ensure normal operation of the AP.
Check if any message is printed on the Web-based configuration interface of the device.

Check if the LED works normally.

16
Installing the Access Point