Electric Safety; Storage Safety; Installation Environment Requirements - Ruijie RG-AP810-I Hardware Installation And Reference Manual

Hardware Installation and Reference Guid
2.1.3

Electric Safety

Warning
Improper or incorrect electric operations may cause a fire, electric shock, and other

accidents, and lead to severe and fatal personal injury and device damage.
Direct or indirect contact with high voltage or mains power supply via wet objects

may cause fatal dangers.
Observe local regulations and specifications during electric operations. Only personnel

with relevant qualifications can perform such operations.
Check whether there are potential risks in the work area. For example, check whether

the power supply is grounded, whether the grounding is reliable, and whether the
ground is wet.
Learn about the position of the indoor emergency power switch before installation.

Cut off the power switch in case of accidents.
Check the device carefully before shutting down the power supply.

Do not place the device in a damp/wet location. Do not let any liquid enter the chassis.

Keep the device far away from grounding or lightning protection devices for power

equipment.
Keep the device away from radio stations, radar stations, high-frequency high-current

devices, and microwave ovens.
2.1.4

Storage Safety

To ensure the normal operation of the device, maintain an appropriate temperature and
humidity in the storage room. Please comply with the storage temperature and humidity
requirements demonstrated in the device specifications.
Caution
If the device has been stored for more than 18 months, please power on the device and
keep it running for 24 hours to activate the device.
2.2

Installation Environment Requirements

Install the device indoors to ensure its normal operation and prolonged service life.
10
Preparing for Installation