Table of Contents
Advertisement
7. RadEye inductive charger
The RadEye holder serves as supporting device and, in combi-
nation with the special battery lid 42506/7034, power supply
unit for the operation of a RadEye instrument in a vehicle. For
convenient mounting to the dashboard one of the mechanical
adaptors 42506/7061 ... 64 is required.
Note: The charging function of this device requires the battery
latch 42506/7034. Without the above mentioned part no charg-
ing will be achieved.
Safety instructions
1. Only use NiMH – accumulators, no primary batteries (Al-
kaline – manganese, zinc – carbon ...)
2. Only use two accumulators of the same type (manufac-
turer, rated capacity ...)
3. Only charge accumulators having the same discharging
state
4. Never use defective accumulators (penetrating/emerging
electrolyte, damaged housing...)
5. The bottom of the housing (aluminum heat sink) gets
warm (50°C, 120°F max.).
6. Not for use in open convertibles.
SENTINEL RadEye G
Iw/Pi/Ff 30.07.08
DB-059-060324 E
7-1
Advertisement
Table of Contents
