Table of Contents
Advertisement
The SENTINEL RadEye G first displays 0.00 mR/h. After the
first detector pulse the measurement will be started.
Unless otherwise specified by the customer when placing the
order, the following values are set by the factory before deliv-
ery:
Alarm 1 for Dose Rate
Alarm 2 for Dose Rate
Alarm 1 and 2 for the Dose
Acoustic alarm (Sound)
LED alarm indication
Vibrator alarm indication
Acoustic count rate indication
Autosend
History recording interval
*) These parameters can only be changed through the serial
interface by means of the configuration software.
SENTINEL RadEye G
Iw/Pi/Ff 30.07.08
0.5 µSv/h or 0.05 mR/h
25.0 µSv/h or 2.5mR/h
app. 16 Sv or 1600 R
active
active
active
Single Pulse
off
120 s *)
DB-059-060324 E
2-9
Advertisement
Table of Contents
