Example:
The dose rate alarm threshold must be changed.
Press "Menu" key, and up/down
arrow keys until
is selected
Alarm Dose Rate
Then enter change menu by press-
ing "Change" key.
Edit value by pressing up / down
keys
select digit by left / right keys
Pre unit "m" may be chosen as
well.
Leaving the last digit with the right
arrow key:
Confirm storage of edited value
pressing "yes"
The set points of the actual dose rate alarm thresholds is seen
at the marks on the intensity bar scale. The upper mark shows
alarm threshold 1, the lower mark shows alarm threshold 2.
SENTINEL RadEye G
DB-059-060324 E
3-7
Iw/Pi/Ff 30.07.08