How To Set The Setup Menu - Toshiba VFNC3-2001P Instruction Manual

efesotomasyon.com -Toshiba inverter,drive,servo,plc
3.1

How to Set the Setup Menu

• If incorrect setting, the drive may has some damage or unexpected movement. Be sure to set the
Instruction
Set the setup menu according to the logic for control input signals used and the base frequency of the motor
connected. (If you are not sure which setup menu should be selected region codes and what values should be
specified, consult your distributer.)
Each setup menu automatically sets all parameters relating to the logic for control input signals used and the base
3
frequency of the motor connected. (See the table on the following page.)
Follow these steps to change the setup menu [Example: Selecting a region code to ]
Panel operated
☆ When changing the region selected in the setup menu, the setup menu can be called again by the following
method. Note, however, that all parameter settings return to standard defaults.
• Set parameter  to "".
• Set parameter  to "".
☆ The parameter settings in the table on the following page can be changed individually even after they are
selected in the setup menu.
setup parameter correctly.
LED display


eu
asia
⇔ 

Warning
Power on. (set is blinking)
jp
Turn the setting dial, and select region code ""
(Europe).
usa
Press the center of the setting dial to determine the
region.
The operation frequency is displayed (Standby).
C-2
E6581595
Operation