efesotomasyon.com -Toshiba inverter,drive,servo,plc
4.4
Checking the region settings selection
: Checking the region setting
• Function
The region selected on the setup menu can be checked.
Also, the setup menu can be started to change to a different region.
Title
4
* Depends upon the setup menu settings. 1 to 4 are displayed.
Content of region settings
The number displayed when parameter is read indicates which of the following regions was selected on
the setup menu.
The setup menu is started by writing =.
For details, see 3.1.
Note: to set to parameter are read-only. Be aware that they cannot be written.
Function
Checking the region setting
: (Japan) is selected on the setup menu.
: (North America) is selected on the setup menu.
: (Asia, Oceania) is selected on the setup menu.
: (Europe) is selected on the setup menu.
Adjustment range
0: Start setup menu
1: Japan (read only)
2: North America (read only)
3: Asia (read only)
4: Europe (read only)
D-12
E6581595
Standard defaults
∗