Toshiba VFNC3-2001P Instruction Manual page 19

efesotomasyon.com -Toshiba inverter,drive,servo,plc
(2) Removing the upper terminal (input terminal) block cover
1)
Insert a screwdriver or other thin object into the
hole indicated with the
3)
While pressing on the screwdriver, rotate the
terminal cover upward to remove it.
★ After wiring is complete, be sure to restore the terminal cover to its original position.
mark.
A-7
2)
Press in on the screwdriver.
4)
Pull the terminal cover up at an angle.
E6581595
1