Toshiba VFNC3-2001P Instruction Manual page 78

efesotomasyon.com -Toshiba inverter,drive,servo,plc
4.3.2
 : Default setting
• Function
It is possible to return groups of parameters to their defaults, clear run times, and record/recall set
parameters.
Title
4

This function will be displayed as 0 during reading on the right. This previous setting is displayed.
Example: 
 cannot be set during the inverter operating. Always stop the inverter first and then program.
Programmed value
50 Hz standard setting (=)
Setting  to  sets the following parameters for base frequency 50 Hz use.
(The setting values of other parameters are not changed.)
• Max. frequency ()
• Base frequency 1 ()
• VI input point 2 frequency ()
60 Hz standard setting (=)
Setting  to  sets the following parameters for base frequency 60 Hz use.
(The setting values of other parameters are not changed.)
• Max. frequency ()
• Base frequency 1 ()
• VI input point 2 frequency ()
Return to default settings
Function
Default setting

Adjustment range
0: -
1: 50Hz default setting
2: 60Hz default setting
3: Default setting 1 (Initialization)
4: Trip record clear
5: Cumulative operation time clear
6: Initialization of type information
7: Save user setting parameters
8. Load user setting parameters
9. Cumulative fan operation time
record clears
10-12: -
13: Default setting 2 (complete
initialization)
• Upper limit frequency ()
：50Hz
• Base frequency 2 ()
：50Hz
• Motor rated RPM ()
：50Hz
• Upper limit frequency ()
：60Hz
• Base frequency 2 ()
：60Hz
• Motor rated RPM ()
：60Hz
D-10
E6581595
Default setting
0
：50Hz
：50Hz
-1
：1410 min
：60Hz
：60Hz
-1
：1710 min