efesotomasyon.com -Toshiba inverter,drive,servo,plc
5.9
Upper limit and lower limit frequencies
: Upper limit frequency
: Lower limit frequency
• Function
Programs the lower limit frequency that determines the lower limit of the output frequency and the upper
limit frequency that determines the upper limit of that frequency.
Command frequency (Hz)
Parameter setting
Title
Upper limit frequency
Lower limit frequency
* Depends upon the setup menu settings. 50.0, or 60.0 (Hz) is selected.
Note: Do not set a value 10x larger than (base frequency 1) and (base frequency 2) for . If a
large number is set, the output frequency can only be output at 10 times of minimum value and
.
Upper limit
frequency
0
100%
Frequency setting signal
* Frequencies that go
higher than will not
be output.
Function
0.5 - (Hz)
0.0 - (Hz)
E-15
Lower limit
Command frequency (Hz)
frequency
0
Frequency setting signal
* Command frequency
cannot be set lower than
.
Adjustment range
E6581595
5
100%
Factory default
setting
∗
0.0