Safety Instructions For Particular Operating Phases; Machine Description - Norton TT 200 EM Instruction Manual

Machine type

1.3 Safety instructions for particular operating phases

Before commencing work
•
Before commencing work, make yourself familiar with the working environment at the place of
use. The working environment includes: obstacles in the area of work and manoeuvre, the
firmness of the floor, necessary protection at the site relating to public thoroughfares and the
availability of help in the event of accidents.
•
Site the machine on an even, firm and stable base!
•
Check for correct mounting of the blade regularly.
•
Immediately remove damaged or badly worn blades, as they endanger the operator whilst
rotating.
•
The material to be cut must be held securely in place on the table to allow no unexpected
movement during cutting operation.
•
Always cut with the blade guard in position.
•
Only fit CLIPPER diamond blades with continuous rim to the machine! The use of other tools
can damage the machine!
•
Read the blades' specifications carefully to choose the correct tool for your application.
•
Attention is drawn to the use of BS2092 safety goggles in conformity with specified Processes
No.8 of the Protection of Eyes Regulation 1974, Regulation 2(2) Part 1.
Electrical powered machine
•
Always turn off the machine and separate it from the main source of electricity before any work
on the machine is done.
•
Make all electrical connections securely to eliminate contact of live wires with spray water or
dampness.
•
When the machine is used with water, it is IMPERATIVE that you earth the machine properly.
Let a qualified electrician check in case of doubt.
•
In case of emergency, you can stop the machine by pushing on the front cover of the switch.
•
In the event of the machine breaking down or stopping for no apparent reason, switch off the
main electricity supply, even in case of power supply failure. Only a qualified electrician is
allowed to investigate the trouble and remedy the fault.

2 Machine description

Any modification, which could lead to a change in the original characteristics of the machine, may
be done only by Saint-Gobain Abrasives who shall confirm that the machine is still in conformity
with the safety regulations.
Serial number Power Safety standard Blade speed
7